Trane 1-Way Cassette-Indoor Manual de instalación descargar pdf (Pagina 12)

12 VRF-SVX27A-EN

Installation

1. Slide the flare nut over the pipe to be flared.

2. Slide the end of the pipe into the hole on the flaring bar that fits the pipe, leaving a length of

pipe, determined by tool type (see table), extending above the flaring bar. Clamp it down.

3. Attach the yoke to the flaring bar, centering the conical part over the end of the pipe that is

extending above the flaring bar.

4. Tighten the yoke securely to flare the end of the pipe.

5. Remove the pipe. The end of the pipe that you flared should look like the end of a trumpet. See

examples of correctly and incorrectly flared pipes.

R-410A clutch type

Conventional flare tool

Clutch type Wing nut type

0–0.020 in. 0.04–0.06 in. 0.06–0.08 in.

Length of pipe extending above flare bar

Pipe

Flaring

bar

Yoke

Flaring bar

Copper pipe

Flare nut

Inclined

Damaged

surface

Uneven

thickness

Correct

Cracked

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Sin comentarios

Trane 1-Way Cassette-Indoor Manual de instalación Pagina 12