
22 VRF-SVX28A-EN
Configuration
The 2-Digit Segments
Each 2-digit segment is differentiated from the others by a combination of operation mode and
timer on/off icons. See Figure 4.
Figure 4. Two-digit segments in the 24-digit sequence
Notes:
• Digits 1, 7, 13, and 19 (shown in green) are factory set and cannot be changed. They do not
appear on the display.
• Digit 2 (shown in red) is used to change the configuration mode (see “Configuration
Modes” for details).
• The digit numbers shown in gray above each digit (D2, D3, etc.) do not appear on the
display.
Configuration Modes
Digit 2 (shown in red in Figure 4) is used to set the configuration mode. The four modes are shown
in Figure 5.
Figure 5. The four configuration modes
Mode “2”: Option setting
Mode “5”: Option setting
Mode “A”: Addressing
Mode “d”: Specific digit changing
Comentarios a estos manuales