
VRF-SVX28A-EN 33
Operation
2. Detach the grill by removing the two safety clip from the front panel.
To clean only the filter, proceed to step 4.
3. Pull out the air filter.
4. Clean the grill and air filter with a vacuum or soft brush. If the dust is too thick, rinse them under
running water and dry in a well-ventilated area.
Note: Drying the air filter in a confined or humid area may cause odors to develop. If odors
occur, re-clean and dry it in a well-ventilated area.
5. Replace the air filter in its original position. The air filter will click when it is in the proper
position.
6. After cleaning the air filter, press the Filter Reset button on the remote control for 2 seconds to
reset the filter schedule. The filter indicator lights when it is time the clean the filter again.
7. Replace the grill by reversing the first three steps.
Note: If the angle on the air flow blades changed from opening the grill, turn the circuit breaker
off and on again to restore the blades to their proper angle.
Periodic Maintenance Checks
Refer to the schedule given in Table 5 for proper unit maintenance.
Comentarios a estos manuales