Trane Performance Air Handlers Manual de instalación descargar pdf (Pagina 26)

26 CAH-SVX01B-EN

Installation - Mechanical

TCP Outdoor Roof Assembly - Single Span

1. Ensure shipping split sections are aligned and pulled together properly. See Figure 13.

2. Add a bead of caulk along the length of the roof seams. Install the pre-cut J-cap over the seam

and secure with #14 sheet metal screws on 12-inch centers.

Note: Use a polyurethane or equivalent caulk. It may be necessary to clamp the joint together or

pre-drill to prevent separation when drilling with screws.

3. Apply caulk to end of J-cap to seal thoroughly.

Figure 13. TCP outdoor roof assembly - single span

Add caulking before

installing J cap

Joining cap

4-in. x 1/4-in. gasket

#10 x 1-in. self-tapping screw

Roof panel

section split

2 3/4-in. wide joining strip

#8 x 1-in. Phillips zip screw

3-in. x 1/8-in. neoprene gasket is

applied to metal joining strip.

Apply gasket to metal strip

before installation.

Roof split outdoor unit

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 99 100

Sin comentarios

Trane Performance Air Handlers Manual de instalación Pagina 26