Trane Performance Air Handlers Manual de instalación descargar pdf (Pagina 38)

38 CAH-SVX01B-EN

Installation - Mechanical

TCC Outdoor Roof Section Assembly (Typical)

1. Join two outdoor roof panels together at the seams at the direction of airflow and secure them

in place with 5/16-inch x 3/4-inch bolts and 5/16 lock nuts. Cut the proper length of roof joint strip

to cover the seam between two outdoor roof panels at the direction of airflow. (exclude single

outdoor roof panel) (see Figure 31).

2. Join outdoor roof panels together at the seams in the direction perpendicular to airflow and

secure them in place with 5/16-inch x 3/4-inch bolts and 5/16 lock nuts. Install the roof joint strip

to cover the seam between two outdoor roof panels in the perpendicular to airflow direction

of. Use 3/8-inch butyl tape to cover the seam between two outdoor roof panels overhang at the

side the unit. Bend joint strip over roof panel and use two number 10 sheet metal screws (one

in each roof panel) to secure joint strip. Trim the roof joint strip to insure that it does not protrude

more than 1/16-inch beyond outdoor roof overhang (see Figure 32 and Figure 33).

Figure 31. Join outdoor roof panels at the seams

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 99 100

Sin comentarios

Trane Performance Air Handlers Manual de instalación Pagina 38