Trane Round In/Round Out Lista de partes Pagina 114

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 158
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 113
114 VAV-PRC011M-EN
DDC Controls
Trane Non-Spring Return Actuator
This actuator is used with DDC controls and retrofit kits. it is available with a 3-wire floating-point
control device. It is a direct-coupled over the shaft (minimum shaft length of 2.1”), enabling it to
be mounted directly to the damper shaft without the need for connecting linkage. The actuator has
an external manual gear release to allow manual positioning of the damper when the actuator is
not powered. The actuator is Underwriters Laboratories Standard 873 and Canadian Standards
associate Class 3221 02 certified as meeting correct safety requirements and recognized industry
standards.
Specifications
Actuator Design
3-wire, 24-AC floating-point control. Non-spring return.
Actuator Housing
Housing type - NEMA 1
Rotation Range
90° clockwise or counterclockwise
Electrical Rating
Power supply - 24VAC (20 to 30 VAC) at 50/60 Hz
Power Consumption - 1.8 VA maximum, Class 2
Electrical Connection
No. 6-32 screw terminals (For DD00 and FM01 control options and retrofit kits.)
6-pin female connector harness for Trane UCM (for Trane DDC controls except retrufit kits)
Manual Override
External clutch release lever
Shaft Requirement
1/2” round
2.1” length
Humidity
5% to 95% RH, Non-Condensing
Temperature Rating
Ambient operating: 32 to 125°F (0 to 52°C)
shipping and storage: -20 to 130°F (-29 to 66°C)
Vista de pagina 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 157 158

Comentarios a estos manuales

Sin comentarios